Process Hierarchy

on front
  Polysilicon plasma etch (isotropic)
Process characteristics:
Depth
Depth of material removed by etch process
Depth*
Depth of material removed by etch process, must be 0 .. 2 µm
0 .. 2 µm
Ambient
Ambient to which substrate is exposed during processing
carbon tetrafluoride, oxygen
Etch rate 0.07 µm/min
Material polysilicon
Pressure
Pressure of process chamber during processing
300 mTorr
Selectivity
Primary material removal rate divided by removal rates of secondary materials (i.e., factors by which primary material is removed faster than secondary materials)
photoresist (category): 5, polysilicon: 1
Sides processed either
Temperature 23 °C
Wafer size
Wafer size
Equipment Drytek2
Equipment characteristics:
Batch sizes 100 mm: 6, 50 mm: 6, 75 mm: 6
Piece geometry
Geometry of wafer pieces the equipment can accept
circular, irregular, rectangular
Piece thickness
Range of wafer piece thickness the equipment can accept
300 .. 600 µm
Wafer holder
Device that holds the wafers during processing.
electrode
Wafer materials
List of wafer materials this tool can accept (not list of all materials, just the wafer itself).
quartz (single crystal), silicon, silicon on insulator, silicon on sapphire
Wafer thickness
List or range of wafer thicknesses the tool can accept
300 .. 600 µm
Comments:
  • Non-metals and standard metals (Al, Ti, and W) are allowed in Drytek2