EVG 301 Megasonic Cleaner
Model 301
Type commercial
Comments
  • Note that 150 mm wafer is not cleaned completely in this tool. The megasonic head does not go to the wafer edge, so only about 80% of the wafer is cleaned from the center out.
Equipment Characteristics
Wafer diameter(s)
List or range of wafer diameters the tool can accept
 100 mm, 150 mm
Wafer geometry
Types of wafers this equipment can accept
 1-flat, 2-flat, no-flat
Wafer holder
Device that holds the wafers during processing.
 teflon carrier
Wafer materials
List of wafer materials this tool can accept (not list of all materials, just the wafer itself).
 quartz (single crystal), silicon on insulator, Pyrex (Corning 7740), silicon
Wafer thickness
List or range of wafer thicknesses the tool can accept
 100 .. 3000 µm