Spinner

Model PWM101
Type commercial
Equipment Characteristics
Wafer diameter(s)
List or range of wafer diameters the tool can accept
25 .. 100 mm
Wafer geometry
Types of wafers this equipment can accept
no-flat, 1-flat, 2-flat, notched
Wafer holder
Device that holds the wafers during processing.
vacuum chuck
Wafer materials
List of wafer materials this tool can accept (not list of all materials, just the wafer itself).
glass (category), Pyrex (Corning 7740), quartz (single crystal), silicon, Borofloat (Schott), silicon on insulator
Wafer thickness
List or range of wafer thicknesses the tool can accept
100 .. 500 µm